Apple’s cutting-edge tracking gadgets, AirTags, are now essential for monitoring personal property. Even though AirTags have a long battery life, you will eventually need to replace the battery. We’ll give you a thorough, step-by-step explanation on how to replace the AirTag battery in this post so that your tracking device keeps working properly.
Step 1: Assemble Your Equipment
Be sure you have all the tools you’ll need on hand before beginning the battery replacement procedure. You will need a replacement CR2032 coin cell battery and a tiny coin, such as a dime or quarter, to change the AirTag battery. To ensure optimum performance, make sure the new battery is of the highest calibre.
Step 2: Find the Battery Compartment
To see the white plastic back, turn the AirTag over. The battery compartment is situated here. On the plastic lid, locate the little, round indentation.
Step 3: To open the battery compartment, use a coin
Place the coin’s edge within the recess and rotate it anticlockwise. Till you sense the lid starting to come loose, gently press on it. Turn the coin again and again until the cover comes off. Take care not to press the AirTag too much since this could harm it.
Step 4: Take the Outdated Battery Out
When the cover is removed, the CR2032 coin cell battery is visible. With extreme caution, remove the old battery from its chamber by using the penny or your fingernail. Make sure you replace the battery appropriately by paying attention to its orientation.
Step 5: Put the Fresh Battery in
After purchasing a new CR2032 battery, make sure it is oriented correctly, as recommended by the interior of the AirTag. To make sure the battery is firmly in place, gently press down on it.
Step 6: Put the battery cover back on
Reposition the battery cover onto the AirTag and twist it clockwise with the coin to ensure a snug fit. Take care not to tighten the cover too much.
Step 7: Verify Correct Operation
After inserting the new battery, flip the AirTag over once more and look for the LED light. The AirTag is active and operating as intended when it flashes briefly. Verify the orientation and connection of the battery twice if the LED is not lit up.
In conclusion, changing the AirTag battery is a simple procedure that guarantees the continued functionality and dependability of your monitoring device. You can easily change the battery and maintain the peace of mind that comes with knowing your priceless belongings are always close at hand by following these easy instructions. Always dispose of old batteries properly, and think about carrying an extra battery on hand in case you need to replace it later.
