A new high-speed motor was built by UNSW that can potentially increase the range of electric vehicles. The design is a prototype-type motor and has a shape that is inspired by the longest railroad in South Korea. It can achieve speeds of 100,000 revolutions per minute.
Furthermore, the maximum power and speed achieved by this novel motor have successfully exceeded and doubled the existing high-speed record of laminated IPMSMs (Interior Permanent Magnet Synchronous Motor), making it the world’s fastest IPMSM ever built with commercialized lamination materials. Most importantly, the motor is able to produce a very high power density, which is beneficial for EVs in reducing overall weight and therefore increasing range for any given charge. The new technology, developed by a team headed by Associate Professor Rukmi Dutta and Dr. Guoyu Chu from the UNSW School of Electrical Engineering and Telecommunications, is an improvement on existing IPMSMs, which are predominantly used in the traction drive of electric vehicles. An IPMSM-type motor has magnets embedded within its rotors to create strong torque for an extended speed range. However, existing IPMSMs suffer from low mechanical strength due to thin iron bridges in their rotors, which limits their maximum speed.
The design
The new design is based on the engineering properties of the Gyopo rail bridge, a double-tied arch structure in South Korea, as well as a compound-curve-based mechanical stress distribution technique. And the motor’s impressive power density potentially offers improved performance for electric vehicles where weight is extremely important. “One of the trends for electric vehicles is for them to have motors which rotate at higher speeds,” says Dr. Chu. “Every EV manufacturer is trying to develop high-speed motors and the reason is that the nature of the law of physics then allows you to shrink the size of that machine. And with a smaller machine, it weighs less and consumes less energy, and therefore that gives the vehicle a longer range.
“With this research project we have tried to achieve the absolute maximum speed, and we have recorded over 100,000 revolutions per minute and the peak power density is around 7kW per kilogram. “For an electric vehicle motor we would actually reduce the speed somewhat, but that also increases its power. We can scale and optimize to provide power and speed in a given range – for example, a 200kW motor with a maximum speed of around 18,000 rpm that perfectly suits EV applications. “If an electric vehicle manufacturer, like Tesla, wanted to use this motor then I believe it would only take around six to 12 months to modify it based on their specifications.
